VM-600(装载量 600 kg) — Vacuum Sintering Furnace VM-600

A single-chamber horizontal batch-type vacuum sintering furnace with a 500×700×2200 mm effective heating zone, 600 kg max load at 1500 °C, 0.7 Pa ultimate vacuum and ±6 °C uniformity at 1380 °C.

Equipment Overview

The VM-600 is a single-chamber, horizontal, batch-type, electrically heated vacuum furnace with an inert atmosphere system; all systems are made of new materials and contain no asbestos. All direct control devices — push buttons, switches, vacuum gauges and instruments — are grouped, labeled and easy to observe.

Equipped with an Xingguang HGL-150 rotary piston pump and ZJP-600 Roots pump, it offers high pumping capacity, excellent dewaxing performance and stable carbon-content control; wax residue inside is below 0.5%.

Graphite ducts extract wax vapor away from the heating zone; three-stage wax traps collect residual wax, quickly handled by swapping collection cylinders. Partial-pressure control covers 1–85 kPa for readily volatile alloys.

Key Features

Applications

Technical Specifications

Furnace typeHorizontal; door: manual / pneumatic
Effective heating zone500×700×2200 mm (W×H×L)
Graphite box (external)495×680×2100 mm (W×H×L); front and rear doors open individually; graphite screw-set assembly
Graphite plate440×1000×5 mm, 54 pcs
Shelf spacing23 mm
Effective workpiece space420×625×1900 mm
Max. workload600 kg at 1500 ℃
Max. / operating temperature1600 ℃ / ≤1550 ℃
Temperature uniformity≤±6 ℃ at 1380 ℃
Heating rate0.1–12 ℃/min adjustable (empty furnace)
Heating systemGraphite heating elements around the working zone
ThermocoupleType W
Vacuum levelDown to 0.7 Pa (clean, empty furnace, after cooling)
Leak rate<1.33×10⁻⁴ Pa·m³/s
Vacuum pumpsXingguang HGL-150 (150 L/s, 11 kW) + ZJP-600 Roots (600 L/s, 7.5 kW)
Vacuum gaugeLeybold, automatic measuring & recording
Process gasLiquid-vaporized N2 and Ar, mass flow controllers
Partial pressure1–85 kPa (pneumatic valve regulates pumping speed)
Cooling waterApprox. 320 L/min; inlet 2–5 kg/cm², differential ≥2 kg/cm²; wall ≤50 ℃ during heating
Power supply380 V 50 Hz 3-phase, 220 kVA transformer + SCR phase-control module
Control systemHoneywell (auto/manual) + Kunlun Tongtai MCGS 15-inch HMI
SafetyOver-current, over-temperature & water-failure protection, independently heated pipelines, explosion-relief device, no power-on with insufficient vacuum, rapid cooling, low-flow alarms
Major accessoriesCKD solenoid valves, Kitz pneumatic valves ×8, YTC proportional valves ×2, Yamatake MFC, Tatung 20 HP motor
WarrantyOne year

Site Navigation